Opening The Configuration Interface Via A Remote Connection With Teleservice - Siemens SIMATIC TS Adapter IE Manual

Working with the TS Adapter IE
7.9 Opening the Configuration Interface
7.9.3

Opening the Configuration Interface via a Remote Connection with TeleService

Procedure
1. Connect the TS Adapter IE via a phone cable to the phone network.
2. Connect the TS Adapter IE to your power supply.
3. Establish a modem connection from your PC to the TS Adapter IE with TeleService. You
4. Select the TeleService menu command "Options > Administrate TS Adapter IE ...".
Result
You see the configuration interface start screen.
IP parameters
You can set the IP parameters in the "Parameters > IP Parameters" tab of the configuration
interface.
See also
Power Supply (Page 27)
56
will find details of the procedure in the online help or in the TeleService manual.
TS Adapter IE
Manual, 11/2010, A5E00977705-03