Opening The Configuration Interface In A Browser Via A Remote Connection - Siemens SIMATIC TS Adapter IE Manual

7.9.4

Opening the Configuration Interface in a Browser via a Remote Connection

Procedure
1. Connect the TS Adapter IE via a phone cable to the phone network.
2. Connect the TS Adapter IE to your power supply.
3. Establish a dial-up connection from your PC to the TS Adapter IE.
4. Launch a browser and enter the IP address you assigned to the TS Adapter IE.
5. Enter your user name and password:
6. Click "Logon".
Result
You see the configuration interface start screen.
IP parameters
You can set the IP parameters in the "Parameters > IP Parameters" tab of the configuration
interface.
See also
Power Supply (Page 27)
Setting IP Parameters by Direct Connection with TeleService (Page 44)
Setting IP Parameters by Direct Connection with the SIMATIC Manager (Page 46)
TS Adapter IE
Manual, 11/2010, A5E00977705-03
User: Default "Administrator"
Password: Default "admin"
Working with the TS Adapter IE
7.9 Opening the Configuration Interface
57