Working With The Ts Adapter Ie; Safety Instructions; Software Installation - Siemens SIMATIC TS Adapter IE Manual

Working with the TS Adapter IE

7.1

Safety Instructions

Qualified personnel
The device may only be serviced by qualified personnel. Qualified personnel under the terms
of the safety instructions contained in this manual is defined as persons who are authorized
to commission, ground and label devices, systems and circuits in accordance with
established safety practices and standards.
Regulation use:
The device may only be used for the applications described in the catalog and the technical
description, and only in connection with third-party devices and components approved or
recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained with due care and attention.
7.2

Software Installation

Procedure
1. Insert the supplied "SIMATIC TeleService Edition" DVD into the DVD drive of your PC.
2. The setup runs automatically. Follow the on-screen instructions provided by the setup
If the autostart function is disabled for your DVD drive, run the setup program by double-
clicking
TS Adapter IE
Manual, 11/2010, A5E00977705-03
WARNING
program.
Setup.exe
in the root folder of your "SIMATIC TeleService Edition" DVD.
7
39