Opening The Configuration Interface By Direct Connection In A Browser - Siemens SIMATIC TS Adapter IE Manual

7.9.2

Opening the Configuration Interface by Direct Connection in a Browser

Requirement
You have already set the IP parameters of the TS Adapter IE.
Procedure
1. Connect the TS Adapter IE via an Ethernet cable to your PG/PC.
2. Connect the TS Adapter IE to your power supply.
3. Launch a browser.
4. In the address field of the browser, enter the IP address you assigned the TS Adapter IE,
5. Enter your user name and password:
6. Click "Logon".
Result
You see the configuration interface start screen.
See also
Power Supply (Page 27)
TS Adapter IE
Manual, 11/2010, A5E00977705-03
in the syntax http://<IP address>.
– User: Default "Administrator"
– Password: Default "admin"
Working with the TS Adapter IE
7.9 Opening the Configuration Interface
55