Siemens SIMATIC TS Adapter IE Manual page 53

Configuration dialogs
The configuration interface of the TS Adapter IE includes the following tabs:
● "Information > Adapter"
● "Information > Modems"
● "Information > Status"
● "Parameters > Modem > Internal Modem"
● "Parameters > Modem > External Modem"
● "Parameters > Outgoing Calls"
● "Parameters > IP Parameters"
● "Security > User Management"
● "Security > Incoming Calls"
● "Security > Outgoing Calls"
● "Actions > Firmware Update"
● "Actions > Parameter Set"
When do parameter changes take effect?
● The parameters from the following tabs only take effect the next time a remote
● All other parameters take effect immediately when you click "Save Settings".
See also
Connection Types (Page 11)
TS Adapter IE
Manual, 11/2010, A5E00977705-03
connection is made:
– "Parameters > Modem > Internal Modem"
– "Parameters > Modem > External Modem"
– The "Internal Modem" and "External Modem" parameters on the "Parameters > IP
Parameters" tab
Working with the TS Adapter IE
7.8 TS Adapter IE Configuration - Overview
53