Siemens SIMATIC TS Adapter IE Manual page 43

Connecting to the analog phone socket
Injury to persons or damage to property may occur.
Connecting the TS Adapter IE ISDN to an analog phone socket can lead to life-threatening
situations and the adapter may be destroyed.
Do not connect the TS Adapter IE ISDN to an analog phone socket.
1. Plug the supplied analog phone cable into the TS Adapter IE Modem.
2. Fold the supplied ferrite over the phone line close to the TS Adapter IE Modem.
3. Plug the other end of the phone cable into your phone socket. Use the TAE adapter if
Connecting to the ISDN phone socket
1. Plug the supplied ISDN phone cable into the TS Adapter IE ISDN.
2. Fold the supplied ferrite over the phone line close to the TS Adapter IE ISDN.
3. Plug the other end of the ISDN phone cable into the ISDN port on your NTBA or your
Connecting to the external modem
Connect your modem by a modem cable to RS232 connector X2.
TS Adapter IE
Manual, 11/2010, A5E00977705-03
WARNING
necessary.
Note
You can operate the TS Adapter IE Modem on internal and public analog
telecommunications networks, TNV-3 systems.
Note
The separation between the telephone side and the rest of the electronics corresponds
with the requirements of the EN 60950-1 and UL 60950-1 standards.
ISDN socket.
Working with the TS Adapter IE
7.5 Connecting the TS Adapter IE
43