Advanced System Operation; Cancel Report; Zone Bypassing/Unbypassing - Electronics Line iConnect User Manual

7.

Advanced System Operation

Besides the basic functions described in the previous chapters, you can access additional
functions via the menu. This chapter describes these functions and the menu navigation
procedure.
Menu Navigation
Using the LCD keypad on the front panel, you can navigate through the menus using
the menu navigation buttons ( / ) and make simple yes/no decisions using the and
buttons.
The availability of menu items depends on the user code that you used to enter Menu
mode. Some menu items are limited to the master code only (User 1). Certain menu
items, such as system programming functions, are not intended for the user and can only
be accessed by the installer.
The following example explains the procedure for Event Log viewing (master code
access only).
1. Press to enter Menu mode.
2. Enter the master code; the first menu item in the main menu,
1. Cancel Report is displayed.
3. Press until 6. Event Log is displayed.
4. Press to enter the Event Log menu; 1. View Log is displayed.
5. Press to choose the displayed item.
Press if you do not want to choose the displayed item. Pressing also takes you back
to the previous menu level.
Menu mode automatically terminates two minutes after the last keystroke.
Throughout this chapter, we have tried to include all of the system functions using a
similar structure and order as they appear in the menu.
7.1.

Cancel Report

The Cancel Report function enables you to prevent the system from reporting in the
event of a false alarm.
To cancel report:
From the main menu, select Cancel Report [1]; all pending messages to
the monitoring service are canceled.
7.2.

Zone Bypassing/Unbypassing

When a zone is bypassed, its sensor is ignored by the system and does not generate an
alarm when triggered.
To bypass or unbypass a zone:
1. From the Bypass Zones menu, select Bypass/Unbyp. [21].
30
7. Advanced System Operation
iConnect User Manual