Electronics Line iConnect User Manual page 44

Reading
1
4
3
6
Display Version
To display the system's software and hardware versions:
From the Service menu, select Version [710]; the software (SW) and
hardware (HW) versions are displayed.
Enable Programming
The installer or the Central Station are able to connect with the system (locally from the
programming menu or remotely with RP using regular telephone, cellular
communication, or through the Internet) in order to check the system status, program
the control system, and change its settings.
If Installer Access and/or RP Access are programmed as ʺuser initiatedʺ the installer or
the Central Station can not access the control system unless the Master User grants
access with Enable Programming command.
To give access to programming:
From the Service menu, select Enable Prog. [711]; a 30‐minute time
window is opened during which the Installer or RP gain access to the
control system programming.
Global Chime
Each sensor can be programmed by your installer to cause the system to chime when
activated. This feature is active only when the system is disarmed. For example, the
system can be programmed to sound a chime each time the front door is opened or
closed. The Global Chime option enables you to turn this feature on and off.
To enable or disable Global Chime:
1. From the Service menu, select Global Chime [712].
2. Select either Enable or Disable.
Global Chime can also be accessed via a convenient shortcut without needing to
enter a valid user code. To access the Global Chime option from Standby mode,
 t hen .
press
Remote Firmware Update
There is an option of control system software version update from a remote PC using
WEB communication. If Remote Programming is programmed as ʺuser initiatedʺ such
update cannot be made unless the Master User grants access to it with Remote Software
Update command.
38
Meaning
Increase microphone sensitivity
Reduce microphone sensitivity
Increase speaker volume
Reduce speaker volume
7. Advanced System Operation
iConnect User Manual