Electronics Line iConnect User Manual page 38

Code 29: Telecontrol Code
The telecontrol code is designed to enable the user to perform a number of tasks via their
telephone. Using this code, the user can call their system to arm and disarm, turn on and
off HA units, activate and deactivate PGM output, cancel the siren or establish Two‐Way
Audio communication.
In partitioned systems:
The master code and the telecontrol code are assigned to full arming and to
both partitions.
The controlled, non‐controlled and limited codes can be assigned either to
partition 1 only, or to partition 2 only, or to the whole system. These codes can
be used for arming and disarming, according to their partition set.
Editing User Codes
User code editing is a feature that is available exclusively to the master code. To
maintain a high level of security, keep all user codes confidential.
To edit a user code:
1. From the main menu select, User Codes [4].
2. Select the code you want to edit;
3. From the code's sub‐menu, select Edit Code; the 4‐digit code is displayed
with the cursor flashing on the first digit.
4. Edit the code.
5. Press ; the new code is stored in the memory.
If you enter a code that is identical to an existing user code, the Control System
sounds an error tone and the new code is not accepted. 0000 is not a valid user
code as this value is used to delete a user code.
Deleting User Codes
As an additional security measure, make certain that you delete any extra codes that are
no longer required.
To delete a user code:
1. From the main menu select, User Codes [4].
2. Select the code you want to delete;
3. From the code's sub‐menu, select Edit Code; the 4‐digit code is displayed
with the cursor flashing on the first digit.
4. Enter 0000.
5. Press ; the code is deleted.
The master code cannot be deleted.
User Code Descriptors
Using the alphanumeric keypad on the front panel, you can edit the 16‐character user
code descriptors and enter the name or title of the users to whom the code is allocated.
32
7. Advanced System Operation
iConnect User Manual