SMS Control
Using your cellular phone, you can also send SMS commands to arm/disarm the system,
commands to the appliances controlled by the Home Automation feature and to PGM
output, and get confirmation when the command is received – see p. 21, Remote
Arming/Disarming via SMS, and p. 25, 5.4 SMS Control.
1.7.
Vocal Message Annunciation
Vocal message annunciation is an optional feature that, if enabled in programming,
causes the system to play short messages that indicate system status.
1.8.
Web Access
The Web Application provides an interface to your security system from your Internet
browser. Via the Web you can perform a wide range of tasks such as arm/disarm,
zone bypass, user code management and home automation control. Additionally, you
can set up the contacts whom you wish to be alerted (by email or text message) when
selected events occur.
The application also allows you to check your home at any time either by viewing a
history of recent events that have occurred or by viewing streaming video from
cameras installed on the premises. For further information, see p. 41, Appendix B: Web
User Application.
4
1. Introduction and Overview
iConnect User Manual
Need help?
Do you have a question about the iConnect and is the answer not in the manual?
Questions and answers