Telephone Control; Sms Control; Scheduling (Not Relevant To - Electronics Line iConnect User Manual

5. Home Automation and PGM
5.3.

Telephone Control

Using the Telecontrol feature, you can control HA units and PGM output remotely via
the telephone.
see p. 27, 6. Telecontrol.
5.4.

SMS Control

If your system supports cellular communication, you can control HA units and PGM
remotely via your mobile phone using a number of SMS commands. The SMS
commands are designed to be entered as templates on your mobile phone.
Each SMS command contains the following elements:
SMS Command Descriptor (up to 43 characters long)
# (separates the descriptor from the actual command)
User Code
Command (0=Off, 1=On)
HA Unit Number (01‐16, or 30 for PGM)
The following example shows the format of an SMS command to switch on a water
boiler controlled by HA unit 08.
SMS Command Descriptor
B O I
Do not include the symbol '#' in the descriptor as the system regards any text
after this symbol as part of the command. The SMS Command Descriptor is
optional but you must still enter the '#' before the user code.
SMS Confirmation Message Format
After an SMS command is executed by the system, if programmed by your installer, a
confirmation message may be returned to your mobile phone. This message includes the
HA unit's descriptor and the command that was sent. The following example shows the
confirmation message you receive for the sample command from the previous section.
5.5. Scheduling (not relevant to PGM)
The Scheduling feature allows you to set an On and Off time for each HA unit. At these
times the system automatically switches the HA unit on and off. You can also choose the
days of the week that the schedule is active. Scheduling is also available on the WUAPP
(Web User Application) and WAP – see p. 48, Apendix B, WEB User Application, Automation.
iConnect User Manual
For further information
L E R
B O I
on
User Code
O N # 1 2
L E R - O
the Telecontrol
On Unit
3 4 1 0
N
features,
8
25