Appendix C: Glossary
Scheduling
Sensors
Service Call
SMS Command
Smartkey
SMS
Confirmation
System Status
LEDs
Telecontrol
Tones
Trouble Tones
TWA
TX
TX List
TX Test
Unbypass
User Code
Walk Test
WUAPP
WAP
Web Remote
Programmer
Wireless
Terminal
Zone
Zone Bypassing
iConnect User Manual
S
A Home Automation feature that switches HA units on and off
automatically according to pre-set times.
The devices installed around the home that alert the panel in the
event of an alarm.
A feature that enables the user to contact the monitoring service
and talk to an operator via the Control System.
An SMS message sent to the Control System that causes the
system to perform a specific function.
An RF ID device used to arm and disarm the system by placing it
against the Wireless Terminal.
An SMS message sent to the user confirming that the SMS
command has been performed.
Luminous indicators on the front panel that provide information
on the arm and power status of the system.
T
A feature that provides remote access via the telephone
including remote arming/disarming, siren cancel and Two-
Way audio.
Chimes sounded by the Control System's internal or external siren.
Tones sounded by the system to indicate a trouble condition.
Two-Way Audio (abbr.)
Transmitter (abbr.)
A service feature that lists all the system's registered
transmitters, their last recorded status and signal strength.
A service feature that displays the source of the last received
transmission.
U
The restore of original state to a bypassed zone.
A four-digit code that grants access to certain system functions
such as arming and disarming the system.
W
A mode that enables sensors to be tested without generating
an alarm.
Web User Application Interface (abbr.) Web Application allowing
full interface to the system's user functions.
A protocol used to enable access to the mobile Web via mobile
phone or PDA.
Software that enable installers or service providers to operate
and program the system from a PC either on-site or from a
remote location.
Intelligent two-way wireless keypad with large LCD display that
serves as an additional user interface of the Control System.
Z
A protected area within the security system.
See Bypassed Zone
51
Need help?
Do you have a question about the iConnect and is the answer not in the manual?
Questions and answers