Electronics Line iConnect User Manual page 20

Smartkey (Model Dependant)
To disarm the System using smartkey:
Place a registered smartkey against the center of the smartkey reader.
When the smartkey is read, the keypad will sound a beep – the system
is disarmed.
Arming the System using Smartkey is possible when One‐Key Arming is
disabled.
To arm the System using smartkey:
Press one of the Arming Keys, then place a registered smartkey
against the center of the smartkey reader. When the smartkey is read,
the keypad will sound a beep – the system is armed.
14
2. The User Interface
iConnect User Manual