Electronics Line iConnect User Manual page 50

the system and all the detectors are working properly and there are no
events to report).
2. It is possible to check if there were alarms in the system – see p. 52, History.
System Users and Codes
In this area you can add, delete, or change users and the User Codes for your system (for
example, add codes for family members).
1. On The Main Page menu, click Settings.
2. Click System Users and Codes, the following page appears:
Web Interface Users and Codes
The Users and Codes page provides a useful tool for managing your system's users.
From this page you can add, edit and delete users as required. You can even issue
temporary (limited) codes to guests that will expire after 24 hours.
For further information on user codes and their various uses, see p. 32, 7.3. User
Codes, Code 29.
On The Main Page menu, click Settings, then Web Interface Users and Codes, the
following page appears:
44
Appendix B: Web User Application
iConnect User Manual