Related Manuals for Electronics Line EL-2626AC
Summary of Contents for Electronics Line EL-2626AC
- Page 2 Introduction The EL-2626AC is a wireless siren designed for use with the infinite wireless control panel (firmware versions 2.14 and above). In the event of an alarm the control panel activates the siren and strobe. The siren is sounded until the end of the siren cutoff programmed at the control panel.
- Page 3 Before permanently mounting the siren, test the reception from the exact mounting position. If necessary, relocate the siren to a better position. To mount the EL-2626AC, place the back cover in position against the wall and mark the upper and lower mounting holes. Install wall anchors in the appropriate positions.
- Page 4 All data is subject to change without prior notice. In no event shall Electronics Line 3000 Ltd. (EL3K) be liable for an amount in excess of EL3K.’s original selling price of this product, for any loss or damage whether direct, indirect, incidental, consequential or otherwise arising out of any failure of the product.
Need help?
Do you have a question about the EL-2626AC and is the answer not in the manual?
Questions and answers