The Ssl Access Privilege Screen - ZyXEL Communications ZyWALL 110 User Manual

• allow user access to specific networks.
• assign private IP addresses and provide DNS/WINS server information to remote users to access
internal networks.
SSL Access Policy Objects
The SSL access policies reference the following objects. If you update this information, in response
to changes, the ZyWALL/USG automatically propagates the changes through the SSL policies that
use the object(s). When you delete an SSL policy, the objects are not removed.
Table 173 Objects
OBJECT TYPE
User Accounts
Application
IP Pool
Server
Addresses
VPN Network
You cannot delete an object that is referenced by an SSL access policy. To delete the object, you
must first unassociate the object from the SSL access policy.

23.2 The SSL Access Privilege Screen

Click VPN > SSL VPN to open the Access Privilege screen. This screen lists the configured SSL
access policies.
Click on the icons to go to the OneSecurity.com website where there is guidance on configuration
walkthroughs, troubleshooting and other information.
Figure 277 VPN > SSL VPN > Access Privilege
Chapter 23 SSL VPN
OBJECT
DESCRIPTION
SCREEN
User Account/ Configure a user account or user group to which you want to apply this SSL
User Group access policy.
SSL Configure an SSL application object to specify the type of application and
Application the address of the local computer, server, or web site SSL users are to be
able to access.
Address Configure an address object that defines a range of private IP addresses to
assign to user computers so they can access the internal network through a
VPN connection.
Address Configure address objects for the IP addresses of the DNS and WINS
servers that the ZyWALL/USG sends to the VPN connection users.
Address Configure an address object to specify which network segment users are
allowed to access through a VPN connection.
ZyWALL/USG Series User's Guide
421