System Configuration; At/Atx Power Mode Setting; Clear Cmos Button; Figure 4-7: At/Atx Power Mode Switch Location - IEI Technology PCIE-Q370 User Manual

PCIE-Q370 Full-size PICMG 1.3 CPU Card

4.6 System Configuration

The system configuration should be performed before installation.

4.6.1 AT/ATX Power Mode Setting

The AT and ATX power mode selection is made through the AT/ATX power mode switch
which is shown in Figure 4-7.

Figure 4-7: AT/ATX Power Mode Switch Location

Setting
1-2 (right)
2-3 (left)

Table 4-1: AT/ATX Power Mode Switch Settings

4.6.2 Clear CMOS Button

To reset the BIOS, remove the on-board battery and press the clear CMOS button for
three seconds or more. The clear CMOS button location is shown in Figure 4-8.

Figure 4-8: Clear CMOS Button Location

Description
ATX power mode (default)
AT power mode
Page 53