Digital Outputs Digital-Out 1+2 (X3) - Pilz PMCprimo Drive2 Installation Manual

9 Interfaces
9.7.5

Digital outputs Digital-Out 1+2 (X3)

•
Reference ground is DGND (terminal X3, Pin 18)
•
All digital outputs are electrically isolated
•
„Open-Collector"-outputs: 24V /10 mA each output
The both digital outputs DIGITAL-OUT 1+2 can not be used with the PMCprimo programming
language.
But you can select with PDrive, screen window "I/O Digital", a predefined output function ,
e.g. „regen resistor threshold exceeded".
More information can be found in the PDrive user manual.
Installation manual PMCprimo Drive2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Page 63