Table of Contents
Advertisement
9.6
RS232 interface, PC interface (X6)
9.6.1
General
The programming of the PMCprimo Drive2 is very easy with the setup software PMCprimo Motion
Control Tools on a Personal Computer (PC).
PDrive and PTerm are part of the PMCprimo Motion Control Tools on the supplied CD-ROM.
Connect the PC interface (X6) of the servo amplifier via a normal commercial 3-core null-modem
cable to a serial interface on the PC. You can select the port (COM1 or COM2) with the setup
software.
Further details can be found in the software manual for PDrive and PTerm.
The interface is electrically isolated through an optocoupler.
Page 56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
9 Interfaces
Installation manual PMCprimo Drive2
Hide quick links:
Advertisement
Table of Contents
