Terminal Locations - D Enclosures - Danfoss VLT Automation Drive FC 300 Operating Instructions Manual

3. How to Install

3.3.3. Terminal locations - D enclosures

Take the following position of the terminals into consideration when you design for cables access.
3
Illustration 3.10: Position of power connections, D3/ D4 enclosure
Illustration 3.11: Position of power connections with disconnect switch, D1/ D2 enclosure
Be aware that the power cables are heavy and hard to bend. Consider the optimum position of the frequency converter for ensuring easy installation of
the cables.
NB!
All D enclosures are available with standard input terminals or disconnect switch. All terminal dimensions can be found in table on next
page.
26
MG.33.U2.02 - VLT ® is a registered Danfoss trademark
®
VLT Automation Drive FC 300
Operating Instructions High Power