Danfoss VLT Automation Drive FC 300 Operating Instructions Manual page 32

3. How to Install
Terminal locations - F2/F4 enclosures
3
Illustration 3.20: Terminal locations - Inverter Cabinet - F2 and F4 (front, left and right side view)
1) Earth ground bar
Terminal locations - Rectifier (F1, F2, F3 and F4 enclosures)
Illustration 3.21: Terminal locations - Rectifier (Left side, front and right side view)
1) Loadshare Terminal (-)
2) Earth ground bar
3) Loadshare Terminal (+)
32
MG.33.U2.02 - VLT ® is a registered Danfoss trademark
®
VLT Automation Drive FC 300
Operating Instructions High Power