Maintenance
9.5 Repair
9.5.3
Replacing the operator panel
9.5.3.1
Replacing the operator panel
To replace the operator panel, proceed as follows:
1. Disconnect the cabinet from the power supply.
2. Open the cabinet.
3. Remove the SD card from the data slot.
4. Release the cables
5. Remove the screws
6. Fit a new operator panel. Fasten the operator panel.
7. Connect the cables.
164
Figure 9-7
Remove the operator panel.
②
①
operator panel from the cabinet door towards the front.
at the operator panel.
(9 x) of the fastening clips. Remove the mounting clips. Withdraw the
SINAMICS SM150 6SL3815-7NP41-0AA1
Operating Instructions Rev.201910281301 EXAMPLE