Docomo LYNX SH-10B Instruction Manual page 98

Setting message quoted for replying
<Quote and reply>
1
In the mail main screen, [Settings]/[General
settings]/[Send/create settings]
2
[Quote and reply]
: Each time you select, the setting is enabled/disabled.
Setting priority type for composing mail
<Preferred format setting>
Change a mail type to be used for composing mail from a notepad.
1
In the mail main screen, [Settings]/[General
settings]/[Send/create settings]/[Preferred format
setting]
2
Select a mail type
Limiting destinations that can be sent to
<Restrict destination settings>
If any destination is registered, the Restrict destination settings are
enabled. If all destinations are deleted, the setting is disabled.
You can register up to 20 destinations.
1
In the mail main screen, [Settings]/[General
settings]/[Send/create settings]/[Restrict
destination settings]
2
Enter the lock no./[OK]/[Add]
3
Select a registration method
;
[Use address book]/select a mail address
;
[Quote Send/Receive History]/select a mail address
• This does not appear while setting secrecy. Q/enter the lock
no./[OK] to display this temporarily.
96
;
[Mail group]/select a mail group
• To select a mail address registered in a mail group: Point the
cursor to the mail group/[Member]/select a mail address
;
[Direct entry]/enter the mail address/[OK]
Touch panel operation in limit destination list screen
■
The following operations are available with displayed keys.
[Delete] Delete
[Change] Change
[Add] Add new item
■ Key operation in limit destination list screen
To delete
Menu operation in limit destination list screen
■
[Add]
[Change]
For subsequent operations nstep 3 of "Limiting destinations that
can be sent to" on P. 96
[Delete]
/[Delete one]/[Yes]
/[Cancel selection]/select a mail address/[Execute]/[Yes]
/[Cancel all]/[Yes]
Restricting mail functions
Restrict sending mail, checking new mail or displaying mail.
1
In the mail main screen, [Settings]/[General
settings]/[Restrict Mail Functions]
2
Enter the lock no./[OK]/[Yes]
: Disabling procedures are the same as when setting.
When you send a mail or display the sent/received mail during Restrict
Mail Functions, enter the lock no. to disable Restrict Mail Functions
temporarily.
*
nP. 96
<Restrict Mail Functions>