Docomo LYNX SH-10B Instruction Manual page 227

Also you can set both hands-free function and audio function to single
device.
Making a call using Bluetooth device
1
Connect a Bluetooth device using Headset service or
Hands-free service
2
Make/Receive a call via the Bluetooth device
If you receive a call while searching the Bluetooth device or exchanging
data, the Bluetooth connection ends.
Key operation during incoming call
■
To turn up ring volume
To turn down ring volume
May not be available depending on the Bluetooth device.
Key operation during call
■
To turn up in-call volume
To turn down in-call volume
May not be available depending on the Bluetooth device.
Playing voice and music of 1Seg and Media
Player, etc. using Bluetooth devices
1
Connect a Bluetooth device using Audio service
2
Activate and watch/play 1Seg, Media Player, etc.
Depending on the conditions of Bluetooth device or operations from the
FOMA terminal, playing voice or music may be interrupted.
]+9
]+8
]+9
]+8
If a voice or music is stopped from a Bluetooth device during the
playback, the FOMA terminal may be outside the Bluetooth area or the
Bluetooth device is turned off. Check the FOMA terminal and Bluetooth
device. In this case, the Audio service may be disconnected depending
on the Bluetooth device. To play the voice or music from the Bluetooth
device again, reconnect the Audio service.
When connecting the Wireless Earphone Set 02 (sold separately),
connect it from the FOMA terminal.
Some music data in AMR format may not be played depending on the
car navigation.
Sending and receiving data
You can connect a Bluetooth device to the FOMA terminal with the File
transfer service to send and receive data.
When receiving data, the connection to the profile other than OPP is
disconnected.
Sending data
■ <Send by Bluetooth>
Example: Phonebook
1
In the main menu, [Address Book]
2
Point the cursor to the name/z/[Send by
Bluetooth]
: Set the receiving Bluetooth device to receive data.
3
Select a send method
;
[Send One]/[Yes]
;
[Send Selected]/select a name/[Do]/[Yes]
;
[Send All]/[Yes]
4
Select a Bluetooth device to connect to
: To send all data: Enter the lock no./[OK]
This operation is not available while activating Bluetooth setting.
225