Setting Finger List Pattern; Setting Pin Code - Docomo LYNX SH-10B Instruction Manual

Finger list pattern

Setting finger list pattern

When you set the finger list pattern, set Unlock method to [Finger list] in
advance (nP. 67).
Changing finger list pattern
1
In the main menu, [Settings]/[Security & location
information]/[Change unlock pattern]/[Finger list]
2
Enter the finger list pattern
3
Enter the new finger list pattern/[Continue]
4
Enter the finger list pattern again
5
[Confirm]
Executing finger list pattern
1
In the finger list pattern authentication screen, enter
the registered finger list pattern
If you enter the wrong finger list pattern five times continuously, you
cannot enter it for 30 seconds.
Displaying track for entering finger list pattern
with line
<Use visible pattern>
1
In the main menu, [Settings]/[Security & location
information]
2
[Use visible pattern]
: Each time you select, the setting is enabled/disabled.
68
Setting vibration for entering
<Vibration while inputting>
1
In the main menu, [Settings]/[Security & location
information]
2
[Vibration while inputting]
: Each time you select, the setting is enabled/disabled.
SIM card lock

Setting PIN code

In Japan, you cannot call to the emergency number (110, 119, or 118)
from the PIN code entry screen and PUK (PIN Unlock Key) entry screen,
with a UIM locked.
Setting handset to require PIN code entry at
power on
<Lock SIM card>
Use the same steps to disable it.
1
In the main menu, [Settings]/[Security & location
information]/[SIM card lock]/[Lock SIM card]
2
Enter the PIN code/[OK]
The setting is saved in the UIM.
■ Entering PIN code at power on
If Lock SIM card is enabled, the PIN code entry screen appears when the
power is turned on.
1
In the PIN code entry screen, enter the PIN
[OK]
code/