Setting Password Display For Entering; Various Lock Functions; Locking When The Foma Terminal Is Closed - Docomo LYNX SH-10B Instruction Manual

Changing PIN code
<Change SIM PIN>
1
In the main menu, [Settings]/[Security & location
information]/[SIM card lock]/[Change SIM PIN]
2
Enter the current PIN code/[OK]
3
Enter the new PIN code/[OK]/enter the new PIN
code again/[OK]
The setting is saved in the UIM.
You cannot change the PIN code when Lock SIM card is disabled.
Disabling PIN lock
1
In the PIN locking screen, [Emergency call]
2
Enter "**05*"/enter PUK (PIN Unlock Key)/enter
"*"/enter the new PIN code/enter "*"/enter the
new PIN code again/enter "#"
: Enter "**05*88888888*7777*7777#" to change PIN code to "7777"
when PUK (PIN Unlock Key) is "88888888".
Display Password

Setting password display for entering

When you enter a password, you can display the entered number
before displaying with [ ・ ].
The setting is enabled when entering the following passwords.
PIN code Password for Wi-Fi connection
Credential storage password
1
In the main menu, [Settings]/[Security & location
information]
2
[Display Password]
: Each time you select, the setting is enabled/disabled.

Various lock functions

You can restrict phonebook operations such as retrieving,
registering, deleting, and calling.
Lock function Operation/Restrictions
Close lock Lock the FOMA terminal according to
open/close of the FOMA terminal or
power on/off.
Restrict address book Restrict the use of phonebook.
Restrict calls Restrict calls excluding emergency
number (110, 119, or 118).
Offline mode Restrict the use of all functions using
communication such as call/mail
function.
Close lock
Locking when the FOMA terminal is
closed
Lock the FOMA terminal according to opening/closing of the
FOMA terminal, etc. When Close lock is set, you can only perform
the operations of the power on/off and call to the emergency
number (110, 119, or 118).
The FOMA terminal is locked in the following cases.
When the FOMA terminal is closed
When the power is turned on
When the backlight is turned off
1
In the main menu, [Settings]/[Security & location
information]/[Close lock]
2
Enter the lock no./[OK]
To disable Close lock
: During Close lock, enter the lock no. in the unlock screen/[OK]
Page
P. 69
P. 70
P. 70
P. 70
69