Docomo LYNX SH-10B Instruction Manual page 79

8
Enter/Select an item
;
[Sender name]/enter the sender name/[OK]
• You can enter up to 20 single/double-byte characters.
;
[Mail address]/enter the mail address/[OK]
• You can enter up to 128 single-byte characters (alphanumeric
characters and symbols).
;
[Sending mail server]/enter the server address/[OK]
• You can enter up to 128 single-byte characters (alphanumeric
characters and symbols).
;
[port number(1~65535)]/enter the port number/[OK]
• Enter the number between 1 to 65535.
;
[Sending authentication method]/select the authentication
method
• When selecting [SMTP authentication], for subsequent operations
nstep 2 of "Setting SMTP authentication" on P. 77
;
[Security (SSL)]
• Each time you select, the setting is enabled/disabled.
;
[Reply address]/enter the address/[OK]
• You can enter up to 128 single-byte characters (alphanumeric
characters and symbols).
• When the address has been entered, each time you select, the
setting is enabled/disabled.
• To edit the address which has been entered: Point the cursor to
[Reply address]/[Edit]/edit the address/[OK]
9
[Return]
10
[Done]/[OK]
Even if you change the SSL setting, the port number is not
automatically changed. Refer to the mail server setting and change.
The account which is registered first is automatically given priority to
normal use. To change the priority, set priority account for creating mail.
When you delete an account, all mails delivered to that account are
deleted. When there is any protected mail, the account cannot be
deleted.
Touch panel operation in set account screen
■
The following operation is available with a displayed key.
[Delete] Delete
Key operation in set account screen
■
To delete
Setting SMTP authentication
1
In the sending authentication method selection
screen, [SMTP authentication]
2
Select the setting method
: When [Use receive settings] is selected, this operation is completed.
3
[Username]/enter the user name/[OK]
: You can enter up to 128 single-byte characters (alphanumeric
characters and symbols).
4
[password]/enter the password/[OK]
: You can enter up to 32 single-byte characters.
5
[Done]
Touch panel operation in individual setting screen
■
The following operations are available with displayed keys.
[Edit] Edit
[Done] Complete
Key operation in individual setting screen
■
To complete
*
<SMTP authentication>
]+S
77