Docomo LYNX SH-10B Instruction Manual page 136

[Share pictures], [Add to Address Book], [Wallpaper Settings]
Depending on the image size, a confirmation screen asking whether to
change the image size may appear. Select [Yes] to display the edit
image screen.
[Switch normal/mirror image]
In the finder screen, the image always appears mirrored (left-right
reversed).
Shooting in Egao focus shutter mode/Furimuki
shutter mode
You can use the following three shutter modes.
Normal mode
Egao focus shutter
*
mode
*
Furimuki shutter mode
* Available when Focus Settings is set to [Face AF].
1
In the still picture shooting screen, switch the shutter
mode
: Touch [NormalbEgao] to switch from Normal mode to Egao focus
shutter mode.
: Touch [EgaobFurimuki] to switch from Egao focus shutter mode to
Furimuki shutter mode.
: Touch [FurimukibNormal] to switch from Furimuki shutter mode to
Normal mode.
: Each time you touch, the key is switched in the order of
[NormalbEgao] b [EgaobFurimuki] b [FurimukibNormal].
2
Automatically shoot a picture when smile/new face is
detected
: You can shoot a still picture by touching [Shutter] while in Egao focus
shutter mode/Furimuki shutter mode.
: Once you shoot, the mode is returned to Normal mode.
134
Mode for normal shooting.
Automatically shoot a picture when a person's
smile is detected. You can set level to detect
smile (nP. 139).
Automatically shoot a picture when a person's
face is detected (when his/her face turns to the
camera).
Continuous shooting
If you set Consecutive shot speed to [Fast] or [Medium], the still pictures
are shot automatically and continuously. When it is set to [Manual], shoot
multiple still pictures continuously with your shutter operations.
When you switch the image size or switch the camera, the multi-shot
setting is automatically set to [OFF].
This function is not available while in Egao focus shutter mode/Furimuki
shutter mode.
1
In the still picture shooting screen, [Menu]/[Filming
mode]/[Multi-shot]
2
Select a number of shots
3
Select a consecutive shot speed
4
[Shutter]
: The first still picture is shot and the following still pictures are shot
automatically.
: In the manual shooting mode, touch [Shutter] until the maximum
number of continuous shots. Brightness and zoom cannot be
adjusted until shooting the maximum number of continuous shots is
completed. Also the key operations other than |, { and +
are not available.
: When continuous shooting is complete, or shooting was canceled by
touching [Cancel], the continuous shooting preview screen appears.
5
Point the cursor to the still picture/[Save]
: To display the single-frame preview screen: Select an image
When Auto-save is set to [ON], all still pictures are saved automatically.
Menu operation in continuous shooting preview screen
■
[Save All]
[Delete All]
[Save One]
[Delete One]
<Multi-shot>