Operation Of Touch Panel - Docomo LYNX SH-10B Instruction Manual

Touch panel

Operation of touch panel

Operate by touching the touch panel (screen) directly with your
finger.
In this manual, operations with touch panel are mainly explained.
The operating range of touch panel is as follows (The operating range
differs depending on the function).
Operating range of touch panel
Cautions when using the touch panel
The touch panel is designed to lightly touch with your finger. Do not
forcefully press with your finger, or press with a pointed object
(fingernail, ballpoint pen, pin, etc.).
In the following cases, the touch panel may not work even if you touch
it. May cause a malfunction.
Operation with a gloved finger
Operation with a fingernail
Operation with foreign objects placed on the operation pad
Operation on the touch panel on which a protective sheet or a
sticker is put
32
Basic operation of touch panel
The following shows the operation of touch panel and its main purpose, and
example key operation which fulfills the same function.
Operation
Touch Select/OK
Touch a key displayed on
the screen.
Move the cursor and select
For a list screen, etc.,
touch the object to point
the cursor and touch
again.
Put your finger on the
touch panel and put it
off.
Touch for a while Display the menu
Keep your finger on the When you touch the
touch panel. screen for a while, a menu
may appear depending on
the function and screen in
use.
Slide Scroll the screen
Slide up/down while a
menu is displayed, etc.
Cancel the selection
When you touch a menu
or item by mistake, slide
away from the menu or
item.
Keep your finger on the
touch panel and slide it.
Example key
Main purpose
operation
+
#/$/
%/&/
+
–
#/$
–