Changing Lock No; Changing Unlock Method - Docomo LYNX SH-10B Instruction Manual

PUK (PIN Unlock Key)
PUK (PIN Unlock Key) is an eight-digit number used to disable the PIN code
lock. You cannot change the code.
If you enter the wrong code ten times continuously, the UIM is completely
locked. In this case, contact a docomo Shop.
Lock No.

Changing lock no.

You can change the lock no. (four to eight digits).
1
In the main menu, [Settings]/[Security & location
information]/[Change unlock pattern]/[Lock No.]
2
Enter the lock no./[OK]
3
Enter the new lock no./[OK]
4
Enter the new lock no. again/[Confirm]
5
[Confirm]
Unlock method

Changing unlock method

Changing unlock method to finger list pattern
■
The finger list pattern is a function used to enable/disable lock by sliding
your finger vertically, horizontally, or diagonally to connect four dots or
more.
1
In the main menu, [Settings]/[Security & location
information]/[Unlock method]/[Finger list]
2
Enter the lock no./[OK]
: The handset protection screen appears for the first setting of finger
list pattern. Follow the instructions on the screen.
3
Enter the finger list pattern/[Continue]
: To display help: z
• To exit the help: [OK]
4
Enter the finger list pattern again
: To re-enter: [Retry]
5
[Confirm]
■ Changing unlock method to lock no.
1
In the main menu, [Settings]/[Security & location
information]/[Unlock method]/[Lock No.]
2
Enter the finger list pattern
3
Enter the lock no./[OK]
4
Enter the lock no. again/[Confirm]
5
[Confirm]
Enter four to eight digits number for the lock no.
67