Changing Operation Sound Volume; Changing Media Play Volume; Setting Voice For Reading Text - Docomo LYNX SH-10B Instruction Manual

Changing operation sound volume

Changing operation sound volume
<Operation sound volume>
You can change the volume of operation sound which sounds when
touching screen or opening/closing the FOMA terminal collectively.
1
In the main menu, [Settings]/[Sound/vibration/
lamp]/[Operation sound volume]
2
Keep touching the volume bar and slide to the left/
right/[OK]
Setting operation sound
You can set whether to enable the operation sound for each item.
The following items can be set.
Audible touch tones
*
MicroSD notification
Open Close
Battery charging completed
* Operation sound is heard at the time of performing Unmount microSD
or microSD Card being broken.
1
In the main menu, [Settings]/[Sound/vibration/lamp]
2
Select an item
: Each time you select, the setting is enabled/disabled.
Operation sound may not be heard depending on the displayed screen.
Selection sound
Pop-up notification sound
Start charging battery
Power ON
Media sound volume

Changing media play volume

1
In the main menu, [Settings]/[Sound/vibration/
lamp]/[Media sound volume]
2
Keep touching the volume bar and slide to the left/
right/[OK]
Speech synthesis

Setting voice for reading text

Speech synthesis is available only when screen display of the FOMA
terminal is set to English (nP. 40).
1
In the main menu, [Settings]/[Speech synthesis]
2
Select an item
;
[Listen to an example]
;
[Install voice data]
• Android Market website appears (nP. 120).
;
[Always use my settings]
• Each time you select, the setting is enabled/disabled.
;
[Speech rate]/select the speed
;
[Language]/select a language
[Listen to an example], [Always use my settings], [Speech rate],
[Language]
Operation is available by executing [Install voice data].
213