Docomo LYNX SH-10B Instruction Manual page 284

If software update fails, [Rewrite failed] appears and all operations may
not be available. In this case, visit a repair center that DOCOMO
specifies.
While updating software, reception reserve alarm and recording reserve
alarm are not activated. In addition, watching or recording does not start.
※ While downloading software, watching or recording starts and
download is interrupted when reception reserve alarm or recording
reserve alarm is activated.
When PIN code is set, the PIN code entry screen appears during restart
after rewriting and you are required to enter PIN code.
While updating software, do not activate other applications.
Updating software automatically
You can download new software automatically and rewrite the software at
the time set in advance.
Automatic update setting is set to [Automatic Update] by default.
When the rewrite is ready, the notification icon [a] (Software update is
available) appears. Then you can confirm the time when the rewrite starts,
change the time, and select whether to rewrite software now.
If the time when the rewrite starts arrives with the notification icon [a]
(Software update is available) displayed, the software is automatically
rewritten and the notification icon disappears.
If the time when the rewrite starts arrives with the insufficient battery or
during a voice call, software update does not start and is performed at the
same time of the following day.
Software cannot be updated automatically when Automatic update setting is
set to [Manual Update] or while updating software by Now update.
282
Setting auto-update
■
1
In the main menu, [Settings]/[System]/[Software
Update]/[Configure the software update]
<Auto-update>
2
Select the operation performed when update software
notification is received
: To update the software automatically: [Automatic Update]
: To not update the software automatically: [Manual Update]