Docomo LYNX SH-10B Instruction Manual page 204

Setting alarm
Sound an alarm before the scheduled start time.
[A] appears on the calendar when Alarm is set.
For details on operations when an alarm sounds nP. 209
1
In the schedule editing screen/task editing screen,
[I] of Alarm
2
Select an item
: To set the start time of alarm: Select the setting of start time/select
the time/[OK]
: To add the start time of alarm: [I] of Alarm
• You can save up to five alarms.
: To delete an alarm: [J] of the start time of alarm
: To set the alarm tone: Select the [Alarm sound] field/select an
alarm tone
: To set the alarm volume: Select the [Volume] field/keep touching
the volume bar and slide to the left/right/[OK]
: To set the vibrator: Select the [Alarm vibrator] field/select the
setting
Saving/Canceling holiday
Set a specific day as a holiday. Set holiday can be canceled.
Japanese national holidays as stipulated in the revised National Holiday
Law and Welfare Law for the Elderly (Law No. 43, 2005) are set by
default (as of June 2010). Dates for Spring Equinox Day and Autumnal
Equinox Day may differ because they are released on February 1 of the
previous year.
Set holiday appears in pink.
1
In the calendar screen, z/[Set/cancel holidays]
2
Select a date
3
[Done]
202
<Set/cancel holidays>
Touch panel operation in setting/canceling holiday screen
■
The following operations are available with displayed keys.
[Today] Move to the date of today
[Done] Complete setting
Key operation in setting/canceling holiday screen
■
Today
To set day of week
To specify period of set holiday
To specify period of canceled
holiday
To change date
To complete setting
To reset
Menu operation in setting/canceling holiday screen
■
Refer to menu operations in the calendar screen (nP. 200) for the
following functions.
Today Change date
[Select Day]/select day of week/[OK]
[Time period settings]/select an item/select the [Start]
enter the start date/[Set]/select the [End] field/enter the end
date/[Set]/[Set]
[Done]
[Reset]/[OK]
[Time period settings]
Specify the period within a year. When the period is over a year, a
message appears. Select [OK] to specify the period again.
The end date cannot be set before the start date.
z+Q
z+W
]+H
^+]+H
z+D
z+O
]+R
field/