Docomo LYNX SH-10B Instruction Manual page 211

12
[Snooze repeat]/enter the number of times to snooze
(one to six times)/[Set]
13
[Vibrator Setting]
: Each time you select, [ON] and [OFF] are switched.
When multiple alarms are set to the same time, they are prioritized in
the following order.
Alarm function Alarm b Schedule alarm b Task alarm
Alarm setting details screen layout
1 Set alarm
Each time you select, [ON] and [OFF] are switched.
2 Set time
3 Name
4 Repeat frequency
■ Key operation in alarm setting details screen
To reset
Menu operation in alarm setting details screen
■
[Reset]/[OK]
[Manner mode priority settings]/select the setting
Set whether to sound the alarm in Manner mode.
Priority (high b low)
12 3
4
]+R
When alarm time arrives
Alarm is activated in accordance with the settings.
The alarm is not activated when the handset is turned off at the alarm
setting time.
Once the alarm duration has elapsed, the alarm stops and the specified
message appears.
Touch panel operation when an alarm sounds
■
The following operations are available with displayed keys.
[Stop] Stop alarm
[Snooze] Stop alarm (Display a confirmation screen for
disabling snooze)
To disable snooze: [Stop]
[Detail] Display the schedule details screen (when
stopping an alarm set for schedule)
[Finish] End alarm (when the alarm duration ends)
The alarm is not activated when the set time arrives during a call. Upon
the end of the call, the previously displayed screen or the stand-by
display is returned, and the alarm is activated.
When a call is started during snooze, snooze notification is interrupted.
After the call ends, snooze notification resumes.
When a set time arrives during other alarm sounding, the alarm is
delayed. When the former alarm stops or the alarm duration has
elapsed, the delayed alarm restarts.
209