Docomo LYNX SH-10B Instruction Manual page 213

Touch panel operation in kitchen timer display screen
■
The following operations are available with displayed keys.
[10sec] Plus 10 seconds to the set time of timer to which
the cursor points
[1min] Plus 1 minute to the set time of timer to which the
cursor points
[5min] Plus 5 minutes to the set time of timer to which
the cursor points
[10min] Plus 10 minutes to the set time of timer to which
the cursor points
[Start] Start the countdown of timer to which the cursor
*2
points
[Stop] Pause the countdown of timer to which the cursor
points/Stop the alarm
[Reset] Reset the set time of timer to which the cursor
points to 00 minute 00 second
*1 It cannot exceed 59 minutes 59 seconds.
*2 The key is displayed while stopping/pausing the countdown.
*3 The key is displayed during the countdown or when the alarm is
ringing.
*4 During the countdown, the countdown is stopped and reset to the set
time. When the alarm is ringing, the alarm is stopped.
■ Menu operation in kitchen timer display screen
[Setting]
[Setting Time]/enter the time/[OK]
[Help]
*1
*1
*1
*1
*3
*4
nP. 211
Setting alarm tone and vibration
You can set the alarm tone and vibration of the kitchen timer.
1
In the kitchen timer display screen, z/[Setting]
2
Set
: To change the alarm tone: [Alarm Sound1]/[Alarm Sound2]/[Alarm
Sound3]/select a tone
: To reset the alarm tone: Touch [Alarm Sound1]/[Alarm Sound2]/
[Alarm Sound3] for a while/[Reset]/[OK]
: To set the vibrator: [Vibrator Setting]
• Each time you select, [ON] and [OFF] are switched.
Using kitchen timer
1
In the kitchen timer display screen, [Start]
: To switch timer: Touch the timer
• The countdown continues.
2
When alarm sounds, [Stop]
: Touch [Reset] while alarm is ringing to stop the alarm and reset to
the set time.
When each of three timers is set to ring at the same time, it sounds from
[Timer1] b [Timer2] b [Timer3].
When one timer is ringing, other timers do not ring even when the set
times arrive.
If Manner mode is set, the alarm tone does not ring.
When the set time of kitchen timer passes in the
■
background
When the alarm of kitchen timer is activated in the background, a time's up
screen appears.
1
In the time's up screen, [Stop]
: Stop the alarm ringing.
: To set the kitchen timer again: [Resetting]
• Time display screen of kitchen timer appears.
<Setting>
211