Interfacing To External Devices; Troubleshooting - Docomo LYNX SH-10B Instruction Manual

Interfacing to external devices

You can play moving pictures saved to the microSD Card on the
FOMA terminal by using supported external devices.
For details on compatible devices, refer to http://k-tai.sharp.co.jp/
support/d/sh-10b/ (in Japanese only). Or, contact the number
below.
* Some moving pictures cannot be played depending on the file format or
the type of external device.
Sharp Data Communication Support Center
TEL: 03-5396-2351
Hours: 10:00 A.M. to 12:00 noon, 1:00 P.M. to 5:00 P.M.,
Monday through Friday
(Closed on weekends, national holidays, and company
holidays)
Check the phone number carefully before dialing.
About moving picture player software
QuickTime™ Player (Free) ver. 6.4 or later (or ver. 6.3+3GPP) provided by
Apple Computer, Inc. is required to play moving pictures on a PC.
You can download QuickTime™ Player from the following website (in
Japanese only).
http://www.apple.com/jp/quicktime/download/
To download, a PC connected to the Internet is required. Additional
transmission fees are charged for downloading.
Refer to the Apple Computer, Inc. website for details on the operating
environment, downloading, and usage instructions.
274

Troubleshooting

First, check whether the software update is required. If it is required,
*
update the software (nP. 281).
If there is no improvement in problems even after checking the following
items, feel free to contact the number listed in "Repairs" (in Japanese
only) on the back of this manual, or a repair center that DOCOMO
specifies.
■ Power
The FOMA terminal is not turned on
Is the battery pack attached properly?
Make sure the battery has not run out.
Charging
■
Cannot charge the battery (Charging lamp does not illuminate, or it
flashes)
Is the battery pack attached properly?
Is the power plug of the adapter (sold separately) inserted into
the outlet or cigarette lighter socket properly?
Are the adapter and the FOMA terminal set properly?
When using the AC adapter, is the connector of the microUSB
adapter for charge (sample) properly connected to the FOMA
terminal and AC adapter?
If calling, transmitting, or another function is performed for a
long time with charging, the FOMA terminal may become warm
and charging lamp may flash. Charge again after the terminal
temperature lowers.
P. 35
P. 39
P. 35
P. 38
P. 38
P. 38
P. 39
P. 37