Docomo LYNX SH-10B Instruction Manual page 243

Call Waiting
Using Call Waiting Service
Call Waiting Service is a service for placing the current call on
hold and answering a new incoming call when the handset beeps
during a call to notify you of another call. In addition, place the
current call on hold and make a new call.
When receiving another call during a call, a beeping is heard twice and
stopped but calling is continued.
Using a service
1
In the main menu, [Settings]/[Call
[NWService]/[Call Waiting]
2
Select the service
;
[Activate Call Waiting]/[Yes]/[OK]
;
[Deactivate Call Waiting]/[Yes]/[OK]
;
[Check Call Waiting setting]/[OK]
Charges are incurred by a caller even when the call is on hold.
Placing the current voice call on hold and making a voice call to another
party are possible even when Call Waiting Service is deactivated.
Answering an incoming call during a call
Place the current voice call on hold and answer an incoming voice call.
1
When a beeping tone is heard during a call, [Hold
current call & answer]
: The original call is automatically placed on hold and an incoming call
: To switch between callers: z/[Swap Calls]
Disconnecting a call to answer an incoming call
Disconnect the current voice call and answer an incoming voice call.
Settings]/
1
When a beeping tone is heard during a call, [End
current call & answer]
: The incoming call is connected.
Making a separate call during a call
Place the current voice call on hold and make another voice call.
1
Dial another party's phone number during a call and
[Call]
: The original call is automatically placed on hold.
: To switch between callers: z/[Swap Calls]
is connected.
241