Saving File In Vcalendar Format To Schedule; Ringing Alarm At Specified Time - Docomo LYNX SH-10B Instruction Manual

Saving file in vCalendar format to
schedule
Example: For the received mail details screen
1
Select an attached file/[Display/play]
2
[Save]/[OK]
: To cancel saving: While saving, [Cancel]
Saving is canceled when the memory of the FOMA terminal has no
available space while saving. Data which completes saving is saved but
data under saving is discarded.
Touch panel operation in vCalendar display screen
■
The following operation is available with a displayed key.
[Save] Save
■ Key operation in vCalendar display screen
To save
Menu operation in vCalendar display screen
■
[Save]/[OK]
208
z+A
Alarm

Ringing alarm at specified time

Activate an alarm tone or vibrator at the specified time/day of
week.
Set the date and time in advance (nP. 40).
You can save up to ten alarms.
Saving alarm
1
In the main menu, [Alarm/Timer]/[Alarm]
2
Select a register destination
3
[Name]/enter the name/[OK]
: You can enter up to 16 single/double-byte characters.
4
[Enable/disable alarm]
: Each time you select, [ON] and [OFF] are switched.
5
[Time]/enter a time (24-hour format)/[Set]
6
[Ring duration]/enter the alarm duration (60 seconds
to 300 seconds)/[Set]
7
[Repeat]/select the repeat method
: For [Day of the week]: [Day of the week]/select day of week/[OK]
• When all days of week are selected, it is set to [Every day].
8
[Alarm sound]/select an alarm tone
9
[Alarm volume]/keep touching the volume bar and
slide to the left/right/[OK]
10
[Enable/disable snooze]
: Each time you select, [ON] and [OFF] are switched.
: When setting the snooze setting to [OFF], proceed to step 13
11
[Snooze interval]/enter the snooze interval (1 minute
to 10 minutes)/[Set]