Rejecting A Call From Specified Phone Number - Docomo LYNX SH-10B Instruction Manual

Reject calls
Rejecting a call from specified phone
number
You can set the handset to reject calls from specified callers.
This setting is available only when a caller sends notify of the caller ID. It
is recommended to also set Reject calls by reason of non-disclosure.
SMS is received regardless of the setting of this function.
Registering phone numbers to reject
You can register up to 20 phone numbers to the reject calls list.
1
In the main menu, [Settings]/[Call Settings]/[Call
blocking]
2
Enter the lock no./[OK]/point the cursor to
[Specified numbers]/[Edit]
3
[Add new]
: To change a registered phone number: Point the cursor to the phone
number/[Change]/[Yes]
: To delete a registered phone number: Point the cursor to the phone
number/[Delete]/select the deletion method/[Yes]
4
Select the entry method of phone number
;
[Use address book]/select a phone number
;
[Direct entry]/enter a phone number/[Done]
Enabling rejection of call
1
In the main menu, [Settings]/[Call Settings]/[Call
blocking]
2
Enter the lock no./[OK]/[Specified numbers]
3
Select the setting
: To check the rejection message: Point the cursor to the
[Play]
: To disable rejection of call: [OFF]
Touch panel operation in rejection message playback
■
screen
The following operation is available with a displayed key.
[Stop] Stop
■ Key operation in rejection message playback screen
To stop
To turn volume up
To turn volume down
message/
]+S
#
$
71