Docomo LYNX SH-10B Instruction Manual page 144

[Edit]/edit the text
[Copy All]
[Read next]
Display "text scanned previously + text scanned this time".
[Read more]
Display "text scanned previously + line break + text scanned this time".
Barcode Reader
Using Barcode Reader
You can use the camera to
scan bar codes (JAN/QR
codes), and use the
scanned information for
operations such as copy,
saving to notepad, making
a call, composing mail,
adding to phonebook,
viewing website or
registering to bookmark,
depending on the contents of scanned item.
Some bar codes cannot be scanned depending on types or sizes.
Bar codes may not be scanned due to scratches, dirt, damage, poor print
quality, lighting conditions or QR code version.
Scan results cannot be saved on microSD Cards.
JAN code
JAN code is a type of bar code using vertical
bars of varying width to express numbers.
The code on the right is read as
[4942857119022].
JAN8 and JAN13 can be read.
142
QR code
QR code is a type of two-dimensional code
expressing data vertically and horizontally.
The code on the right is read as [株式会社NTT
ドコモ].
1
In the main menu, [Barcode Reader]
2
Scan the bar code
: The Barcode Reader screen appears and scanning starts. Display
bar code (JAN/QR code) to be scanned in the center of the screen.
: Position the camera 10 cm or more from the bar code (JAN/QR
code). Keep aligned and do not move the FOMA terminal or code
while scanning.
: When scanning is complete, an end tone sounds and the scan result
screen appears.
: To pause/resume scanning: [Pause]/[Read again]
10 cm or more