Using Trackball; Using Uim (Foma Card) - Docomo LYNX SH-10B Instruction Manual

Operating with touch operation
■
You can operate with your finger without displaying a menu or key.
Available touch operations differ depending on the function or screen.
Operate not to touch a key shown in the screen.
Retrieving menu by touching for a while
■
When you touch the screen for a while, a menu may appear depending on
the function and screen in use.
This manual describes the operation method when a function can be
retrieved only with touching for a while.
Other operations
■
Switching pages
When the stand-by display or main menu, etc. contains multiple pages,
quickly slide to the left/right to switch pages.
Quickly slide to the right to return.
Example: When switching from page 1/2 to 2/2 of the main menu
Quickly slide to the left
Main menu Page 1/2
34
Main menu Page 2/2
Entering numbers
Number panel appears when you are required to enter
numbers such as date and time. Touch [+]/[–] to enter
numbers.
Touch for a while to increase/decrease numbers
continuously.
You can also select the number entry field and directly enter numbers.
Adjusting touch panel
1
In the main menu, [Settings]/[System]/[Adjust
touch panel]
2
Touch the center of the six displayed circles
Trackball

Using trackball

You can move a cursor and set an item with the trackball in the
same way as touch panel and keyboard operations.
To move a cursor: Roll the trackball
To execute/set the selected item: Press the trackball
UIM

Using UIM (FOMA card)

A UIM is an IC card that records personal information, such as
phone numbers, etc. Load the phonebook data stored in the UIM
(nP. 63).
You cannot make a voice call, send/receive a mail and use
communication functions such as packet transmission on the FOMA
terminal without inserting a UIM.
<Adjust touch panel>