Docomo LYNX SH-10B Instruction Manual page 221

;
[PIN code method]/[Yes]/enter the displayed PIN code on
your access point/[OK]
3
[OK]
Registering access point manually
<Add Wi-Fi network>
Register access points which are not compatible with AOSS/WPS manually.
Enable Use Wi-Fi in advance.
1
In the main menu, [Settings]/[Transmission]/[Wi-Fi
settings]/[Add Wi-Fi network]
2
Select the [Network SSID] field/enter the network
SSID
3
Select the [Security] field/select a security/[Save]
Deleting access point being connected
1
In the main menu, [Settings]/[Transmission]/[Wi-Fi
settings]
2
Select an access point being
[Yes]
Setting network notification
You get notified by the notification icon when Wi-Fi network is detected.
1
In the main menu, [Settings]/[Transmission]/[Wi-Fi
settings]
2
[Network notification]
: Each time you select, the setting is enabled/disabled.
connected/[Forget]/
<Network notification>
Setting when to suspend connection
<Wi-Fi sleep policy>
1
In the main menu, [Settings]/[Transmission]/[Wi-Fi
settings]/[MENU]/[Advanced]/[Wi-Fi sleep policy]
2
Select the setting
Connecting by using static IP
1
In the main menu, [Settings]/[Transmission]/[Wi-Fi
settings]/[MENU]/[Advanced]
2
[Use static IP]
: Each time you select, the setting is enabled/disabled.
3
Select an item/enter the information needed for your
Wi-Fi network
4
[MENU]/[Save]
Logging in access point outside (DOCOMO
Public Wireless LAN Service) automatically
<DOCOMO Public Wireless LAN Service>
You can set the handset to log in DOCOMO Public Wireless LAN Service
automatically when you come within its service area.
When using this function, please note the followings.
Separate subscription is required to use DOCOMO Public Wireless LAN
Service.
In some service areas, automatic login function may be unavailable
(available only in the area whose SSID is docomo).
If you set the automatic login to [ON], the handset logs in automatically
when coming within the service area. Note that high charges may be
incurred if your subscription is Mzone daily plan and you set the
automatic login to [ON].
<Use static IP>
Continued on next page
219