Docomo LYNX SH-10B Instruction Manual page 245

Nuisance Call Blocking service
Using Nuisance Call Blocking Service
You can register phone numbers for "nuisance calls" such as
prank calls. When numbers are registered for the Nuisance Call
Blocking Service, calls are automatically rejected and a guidance
answers them.
A ring tone does not sound when calls are received from registered
numbers. In addition, the calls are not saved in the incoming call history.
You can reject callers with no caller ID.
International calls may not be rejected.
Responses when other services are active
■
When calls are received from numbers registered for the Nuisance Call
Blocking Service, actions are as follows in each service.
Service
Voice Mail Service Rejection guidance is played.
Message is not recorded.
Call Forwarding Service Rejection guidance is played.
Call is not forwarded.
Call Waiting Service Rejection guidance is played.
Using a service
1
In the main menu, [Settings]/[Call
[NWService]/[Nuisance Call Blocking service]
2
Select the service
;
[Register Nuisance caller]/[Yes]/[OK]
• Register the last caller.
;
[Register selected number]/enter a phone
[Yes]/[OK]
;
[Delete all entries]/[Yes]/[OK]
;
[Delete last entry]/[Yes]/[OK]
• The last registered number is deleted. Repeat this operation to
delete numbers individually from the last registered number.
;
[Check the number of entries]/[OK]
Response
Settings]/
number/[OK]/
USSD
Saving and using services
Save and use new DOCOMO network services when they are
added.
You can save command of new services to the FOMA terminal. When
there is a command, it is saved as a "USSD" to the FOMA terminal.
Using a service
1
In the main menu, [Settings]/[Call
[NWService]/[Additional service]/[USSD]
2
Select the service/[OK]
Menu operation in USSD save screen
■
[Add]/enter a service name/enter the command/[OK]
[Edit]
Editing procedures are the same as when [Add] is selected.
[Delete one]/[Yes]
[Delete all]/[Yes]
[Add]
You can save up to ten new network services.
You can enter up to 20 single/double-byte characters for a service
name.
Settings]/
243