Docomo LYNX SH-10B Instruction Manual page 199

Using compass
<Compass mode>
Compass mode screen layout
■
2 3
1
1 Map window
For details on viewing a map nP. 197
2 Azimuth
3 Angle
Display the angle from North to the front of the FOMA terminal.
4 Compass
Needle rotates in accordance with the direction of the FOMA terminal.
In accordance with the tilt of the FOMA terminal, flat display and
birds-eye display are switched.
Touch panel operation in compass mode screen
■
The following operations are available with displayed keys.
[Update] Update the map to present location
[Adjust accuracy] Adjust the accuracy of compass
[Change View] Switch to map mode
The following touch operation is available.
To switch to map Touch the map window
mode
Key operation in compass mode screen
■
To update the map to present location
To adjust the accuracy of compass
To switch to map mode
4
z+U
^+C
^+V
Menu operation in compass mode screen
■
[Change View]
[Adjust accuracy]/[OK]/operate according to the screen/[OK]
Adjust the accuracy of compass.
To cancel the accuracy adjustment: While adjusting the accuracy,
[Stop]/[Yes]
For details on accuracy adjustment for sensor nP. 198
[Update]
Update the map to present location.
Using map
<Map mode>
There are three types of map that is displayed on map mode as follows.
Standard map Point name is displayed on the map image.
Satellite Point name is displayed on the satellite.
Street view Streets which can be viewed with Street view are
displayed on the standard map with blue borders.
Map mode screen layout
■
1
2
3 4
1 Map
Display the previously used type of map.
2 Compass window
For details on viewing a compass nP. 197
3 Human icon
It is displayed on the present location.
4 Azimuth icon
Display the direction of the FOMA terminal on the map.
5
Continued on next page
197