Setting Up The Channel Trace; Figure 2-26 Trace Setup Display - Keysight Technologies N8262A P Series User Manual

2 General Power Meter Functions

Setting up the Channel Trace

This feature is only available when a P-Series Power Sensor is connected.
NOTE
The Trace Setup is the only location where you can change the Y-axis units from
NOTE
dBm
Procedure
This procedure uses the Trace Setup under the Channel Setup menu.
NOTE
Alternatively, you can use a more visual method, when in the Graphical Trace
Mode (Trace Control Menu), to set the channel's Trace Control. (See
Trace Display"
1 Click
Figure 2-26
72
to .
Watts
on page 100).
, Trace Setup
Trace setup display
to display the Trace Setup menu.
"Setting the
Keysight N8262A User's Guide