Step Detection - Keysight Technologies N8262A P Series User Manual

Step Detection

To reduce the filter settling time after a significant step in the measured power the
filter can be set to re-initialize upon detection of a step increase or decrease in the
measured power. Step detection can be set in both manual and automatic
measurement average modes.
Procedure
Set step detection as follows:
1 Click
2 Use the
3 Click
4 Click
Keysight N8262A User's Guide
. Click to select the required channel.
Channel
and softkeys to select the Step Detect setting field.
to check the step detection to on or off.
softkey to close the Channel Setup screen.
General Power Meter Functions 2
63