Operator Maintenance - Keysight Technologies N8262A P Series User Manual

4 Maintenance

Operator Maintenance

This section describes how to replace the power line fuse and clean the power
meter. If you need additional information about replacing parts or repairing the
power meter, refer to the P-Series Modular Power Meter Service Guide.
To clean the power meter, disconnect its supply power and wipe with a damp
cloth only.
For all voltages the power meter uses a 250 V, F3.15 AH, 20 mm fast blow fuse
with high breaking capacity (Keysight part number 2110-0957).
The power meter has an internal fuse. If you suspect that this fuse needs to be
NOTE
replaced, it must be done by trained service personnel. Please refer to
"Returning Your Power Meter for Service"
138
on page 143.
Keysight N8262A User's Guide