Table of Contents
Advertisement
1
Introduction
Figure 1-3
10
Using the
measurement window.
Using the
choose either two rectangular windows, a single enlarged window, or a full screen
display by pressing. The display style is applied to the currently selected window
or measurement line.
11 The upper window is configured to show a single numeric display.
12 The lower window is configured to show an analog meter which displays the
13 With a P-Series Power Sensor connected, the symbol shows the trigger state
14 The channel measurement frequency.
15 This displays the connected sensor, the offset value, and the acquisition mode
32
14
13
11
12
Single numeric and analog display
Figure 1-3
shows the default display mode of two measurement windows. The
upper measurement window has a blue highlight on the right hand side of the
window showing it has been selected.
,
or
softkey on numeric measurement results window you can
measurement result and the meter scaling.
(Free Run),
(Stopped),
on the channel. On dual channel models it shows for both channels.
softkeys you can change the selection of the
(Negative Slope), or
15
10
(Positive Slope).
Keysight N8262A User's Guide
Advertisement
Table of Contents
