Keysight Technologies N8262A P Series User Manual page 60

2 General Power Meter Functions
1 Click
2 Enter the new offset value (or click
3 Continue adding/editing values until you have entered all the data you require.
4 When you have finished editing the table click
If you measure a signal with a frequency outside the frequency range defined in
NOTE
the frequency dependent offset table, the power meter uses the highest or
lowest frequency point in the frequency dependent offset table to calculate the
offset.
60
to add a new frequency value (or click
Insert
numeric softkey pad to enter the required value in the Frequency pop-up
window. Complete the entry by clicking the
pad to enter the required value in the Offset pop-up window. Complete the
entry by pressing the
Change
softkey.
%
to edit). Use the
Change
, softkeys.
GHz MHz
to edit). Use the numeric softkey
to save the table.
Done
Keysight N8262A User's Guide