Keysight Technologies N8262A P Series User Manual page 121

Measurement Setup
Press
Use the
When you have configured the measurements gates, you can assign the
measurement feed and display the results in numeric formats. For example, dual
numeric display with Gate 1 peak measurement minus Gate 3 peak measurement.
Also, from this menu you can add offsets and measurement limits. For further
detail on these settings, refer the appropriate section.
Feed1/2
Offset
Limits
Display
Click
Choose the display format to present the measurements results. The options,
other than trace, are as follows:
Single Numeric
P-Series sensor, refer to
Dual Numeric
P-Series sensor, refer to
Analog
sensor refer to
Keysight N8262A User's Guide
. The Measurement Setup menu is displayed.
, , , and
to configure the setting.
"Setting the Measurement Display"
"Setting Display Offsets"
"Setting Measurement Limits"
. The Display Form menu is displayed.
If you need to configure the numeric format when using a
"Numeric Format"
If you need to configure the numeric format when using a
"Numeric Format"
If you need to configure the analog format when using a P-Series
"Scaling the Analog Display"
Using P-Series Power Sensor
softkeys to highlight the setting field and click
on page 76
on page 43
on page 72
on page 77 for more details.
on page 77 for more details.
on page 83 for more details.
3
121